Maintaining a carpet is absolutely essential as any noticeable spot on your carpet can blotch your image. Approaching a professional carpet cleaning service is quiet essential as they know what type of cleaning method is right for your carpet. Depending on the factors such as type of material and whether the fabric can end the cleaning process etc., commercial carpet cleaners decide the cleaning method. Beside, professional carpet cleaners will cause minimum disturbance to your schedule as they are prepared to work as per your convenience.
Discussed below are a few carpet cleaning methods that commercial carpet cleaning services often follow. The most common cleaning methods include shampooing, steam cleaning and dry cleaning etc. Regardless of the method used for the carpet cleaning, initially it is necessary to vacuum everything from the carpet, especially when deep cleaning is needed. Carpet owners need to understand these methods and identify the most appropriate one depending on their carpet type, budget and convenience.
Shampooing
In this cleaning method, following equipments are used: rotatory floor machine also called as floor buffer that comes with solution tank attachment and nylon shampooing brush. Particles like loose soil are removed initially by pre-vacuuming the areas where shampooing is expected to be done. Once the machine is assembled, technicians use it by mixing carpet shampoo. The amount of shampoo to be used depends on manufacturer's instructions. Then the cleaners work the machine in circular motion throughout the carpet, so that the shampoo is released even on the carpet. The process is continued till it forms letter 'C'. Then they stop releasing the shampoo and move the machine circularly or in other directions to scrub the dirt away. The shampoo can then be extracted by vacuuming the areas. This method is suitable for carpets with traffic pattern or those which are heavily soiled.
Steam or hot water extraction cleaning
This method requires a steam machine, which is used to inject hot water and cleaning solution into the cleaning areas of carpet. The machine features wand and hot water solution holding unit. To set up, the vacuum hoses and solution unit are attached to the wand and machine unit. For starting the cleaning process, technicians start from far end and then clean returns, release the cleaning solution into the carpet by squeezing the trigger, while moving the wand backwards. The process is completed by giving a dry pass to the areas using the wand and removing excess moisture. This method is recommended for office cubicles and areas where tight cleaning is needed.
Quick dry cleaning
As the quick drying technique allows you to get back to your routine life within few hours, it is being preferred over steam cleaning. The most popular method in this category is Bonnet cleaning, which is a low-moisture and quick-drying cleaning technique. This method needs the same machine used in shampooing technique but the attachments vary. Here a block driver is used, which is connected to the machine for holding the absorbent pad. The cleaning solution is mixed and dispensed into the pressure spray, which can be used to spray in the cleaning areas. To start the cleaning, technicians buff the areas with the bonnet pad and move the machine in circular and other directions. All the dirt and moisture is absorbed by the bonnet and the carpet will be set for use in about an hour.
While implementing any of these methods the commercial carpet cleaners carry few things such as air movers, fans, spot cleaning chemicals and removers.
Air movers and fans: While performing the cleaning process it is common that workers occupy the area. They step in and out from wet areas to dry areas making it difficult to dry the area completely. So, to quickly dry the wet areas it is a must to carry the air movers and fans.
Spot cleaning chemicals and tools: Spot cleaning tools are required for areas where strains can be found. Spot cleaning chemicals and tools like gum remover, all-purpose spot remover and rust remover are quiet essential for the spot cleaning.
Request your carpet cleaner to use a protectant at the end of the cleaning process. You can also request them to spray deodorizer. These important carpet cleaning tips will help make your carpet remain clean for long and emanate a lingering fragrance.
